JL-SUPERTIG200EX
JL-SUPERTIG200EX
■ IGBT inverter DC MMA,Pules ACDC TIG
■ Lift and HF for TIG
■ 32 bits MCU inside
■ Analog opeation panel design.
■ 7Pins Foot pedal or finger AMPS adjustment
■ 2T/4T function
■ Advanced square wave for AC TIG,
■ PFC (option).
■ TIG spot welding and spot time adjustment
■ Arc start and end amps and pre/post gas,up/down slope adjustment.
■ Pulse and AC frequancy and width adjustment.
■ Lift and HF for TIG
■ 32 bits MCU inside
■ Analog opeation panel design.
■ 7Pins Foot pedal or finger AMPS adjustment
■ 2T/4T function
■ Advanced square wave for AC TIG,
■ PFC (option).
■ TIG spot welding and spot time adjustment
■ Arc start and end amps and pre/post gas,up/down slope adjustment.
■ Pulse and AC frequancy and width adjustment.
分享到：
| Model | PowerSupply Voltage | Rate Input Capacity (KVA) | Rate Input Current | No Load Voltage | Output current Range | Duty Cycle | Weight | L*W*H(mm) | |
| SUPERTIG200EX | 1*230V 50/60Hz | 6.3 | 27.5 | 70 | TIG3-200A, MMA:20-160A | 60% | 23kg | 560*240*460 | |
| SUPERTIG250EX | 1*230V 50/60Hz | 8.8 | 38 | 80 | TIG:5-250A, MMA:5-200A | 60% | 26kg | 560*240*460 | |
| SUPERTIG315EX | 3*400V 50/60Hz | 12 | 29 | 80 | TIG:10-315A, MMA:10-250A | 35% | 30kg | 560*240*460 | |
ACCESSORIES
■ Tig torch 4m
■ Earth clamp cable with 300A earth clamp
■ Welding cable with 300A electrode holder
■ Gas hose 2m
■ Tig torch 4m
■ Earth clamp cable with 300A earth clamp
■ Welding cable with 300A electrode holder
■ Gas hose 2m
OPTIONAL ACCESSORIES
■ Amps control tig torch
■ foot pedal
■ Regulator
■ Water cooler
■ Amps control tig torch
■ foot pedal
■ Regulator
■ Water cooler
上一个：
JL-SUPERTIG200DI
下一个：
JL-DIGITIG200ACDC
Contact Person: Mr. Shu Jinliang
Tel: 86-510-82728965 Fax: 86-510-82720790
Tel: 86-510-82728965 Fax: 86-510-82720790
Copyright(C) 2019 JL Industrial Supply Company Limited All Right Reserved.苏ICP备15036534号