JL-TC205DA
JL-TC205DA
■ High frequancy IGBT inverter DC MMA,Pules DC TIG and CUT
■ Lift and HF for TIG
■ HF or without HF pilot arc for Plasma cutting
■ 32 bits MCU inside
■ Analog and PVC sticker operation panel
■ Foot pedal and finger amps remote control
■ 2T/4T function
■ Hot arc start and Arc force ,Antistick for MMA
■ Current Down slop and gas post flow time adjuestment.
■ low pilot amps and long life tip/electrode
■ Lift and HF for TIG
■ HF or without HF pilot arc for Plasma cutting
■ 32 bits MCU inside
■ Analog and PVC sticker operation panel
■ Foot pedal and finger amps remote control
■ 2T/4T function
■ Hot arc start and Arc force ,Antistick for MMA
■ Current Down slop and gas post flow time adjuestment.
■ low pilot amps and long life tip/electrode
分享到：
| Model | PowerSupply Voltage | Rate Input Capacity (KVA) | Rate Input Current(A) | No Load Voltage | Output current Range | Duty Cycle | Max cutting thicknes | Weight | L*W*H(mm) | |
| TC205DA | 1*230V 50/60Hz | 7.5 | 32.1 | 65 | TIG:5-200A, MMA:10-160A，CUT:20-50A | 60% | 20mm | 16kg | 415*185*325 | |
| TC184DA | 1*230V 50/60Hz | 6 | 25 | 65 | TIG:5-180A, MMA:10-140A，CUT:20-40A | 60% | 15mm | 12kg | 415*185*325 | |
ACCESSORIES
■ Tig torch 4m
■ Earth clamp cable with 300A earth clamp
■ Welding cable with 300A electrode holde
■ Gas hose 2m
■ Plasma cutting torch
■ Air regulator
■ Tig torch 4m
■ Earth clamp cable with 300A earth clamp
■ Welding cable with 300A electrode holde
■ Gas hose 2m
■ Plasma cutting torch
■ Air regulator
OPTIONAL ACCESSORIES
■ Amps control tig torch
■ foot pedal
■ Regulator
■ 110/220V dual
■ Amps control tig torch
■ foot pedal
■ Regulator
■ 110/220V dual
上一个：
JL-MZ-1000D
下一个：
JL-TC205DP
Contact Person: Mr. Shu Jinliang
Tel: 86-510-82728965 Fax: 86-510-82720790
Tel: 86-510-82728965 Fax: 86-510-82720790
Copyright(C) 2019 JL Industrial Supply Company Limited All Right Reserved.苏ICP备15036534号